Maintenance Plans

Preventative Maintenance Experts

At Air Control Heating & Air Conditioning LLC, we offer preventative maintenance agreements in Emory to service all your heating and cooling systems. As the seasons change throughout the year, your systems need regular maintenance to ensure they operate at peak efficiency. It’s also important because it can help stop potential breakdowns in the future. Our technicians can make sure you’ll never find yourself with a heating or cooling outage.

Air Control Heating & Air Conditioning LLC offers heating and air conditioning maintenance services, completed by a qualified service technician for $75 per service, twice per year. Our technicians will check your thermostat calibration and check, clean or replace filters on your air conditioning unit or furnace at all maintenance service visits in addition to the following inspection and maintenance service checklists.

• COOLING MAINTENANCE SERVICE CHECKLIST

  Outside Unit Inspection:

  • Clean area around outside unit
  • Check disconnect
  • Check contactor
  • Check electrical connections
  • Check insul-tube
  • Check run capacitor/ dual capacitor
  • Check fan blades/ blow out blade
  • Condenser motor amps
  • Compressor amps
  • Check reversing valve
  • Check compressor motor temp
  • Check freon level
  • Check 5 temperatures
  • Remove debris from inside unit
  • Tighten cabinet screws/check for missing
  • Check and replace valve caps, if needed
  • Rinse off condensing coil
  • Wipe down condensing unit

  Inside Unit Inspection:

  • Visually inspect ductwork
  • Clean/inspect return air chase
  • Check electrical connections
  • Check blower motor amps
  • Check blower motor run cap
  • Check float safety switch
  • Inspect and clean secondary drain pan
  • Check vent pipe for rust or leak issues
  • Check evap coil/clean with green cleaner
  • Clear drain line
  • Install algae tablets
  • Check supply temp/return temp
• HEATING MAINTENANCE SERVICE CHECKLIST

  Outside Unit Inspection:

  • Clean area around outside unit
  • Check disconnect
  • Check contactor
  • Check electrical connections
  • Check insul-tube
  • Check run capacitor/ dual capacitor
  • Check fan blades/ blow out blade
  • Condenser motor amps
  • Compressor amps
  • Check reversing valve
  • Check compressor motor temp
  • Check freon level
  • Check 5 temperatures
  • Remove debris from inside unit
  • Tighten cabinet screws/check for missing
  • Check and replace valve caps, if needed
  • Test defrost board
  • Test defrost sensor

  Inside Unit Inspection:

  • Visually inspect ductwork
  • Clean/inspect return air chase
  • Check electrical connections
  • Visually inspect heat exchanger for cracks
  • Check burner ignitor and operation
  • Check inducer motor
  • Check blower motor amps and run cap
  • Check heat strips
  • Check float safety switch
  • Inspect and clean secondary drain pan
  • Check vent pipe for rust or leaks
  • Check evap coil and clear drain line
  • Check supply temp/ return temp

Call Air Control Heating & Air Conditioning LLC today to sign up for a
semi-annual maintenance service plan!